| 品牌：bimed | 适用范围：接线 | 产地：上海 |
| 接管口径：12-16 | 适用软管：橡胶管 | 使用流体：气体 |
| 电缆类型：其他电线、电缆 | 物料编号：122 |
本店商品均不含税点金额，如需开发票请咨询客户添加税点，如直接备注开票未咨询客服＋税点的，本店有权不开发票。
These cable glands are developed according to end users' requirements. Their features can be summarized as follows:
·Easy insertion of the cable from the two sides of the gland.
· Open contact fingers in loose position.
· Free radial and axial movement of the cable.
· Easy radial and axial movement of the cable, even in contact position without any damage to the braid with the help of rounded contact finger surfaces.
· Large contact surfaces of the fingers allow low contact resistance even on loosely woven cable braids (the contact surfaces do not sink into the braided wires).
· High contact performance even under vibrating conditions with help of the reducedA2distance between the "sealing clamping level" and "EMC contact level".
Technical Details
Material
Body Brass, Nickel plated
Cap Brass, Nickel plated
Seal CR (Chloroprene Rubber)
Clamp.Insert Polyamide 6O-ring NBR
Operating Temperature
Permanent -20 °C up to +100 °C
Intermittent -40 °C up to +150 °C
Benefits
Suitable for highest demands of todays technology
Easy to assemble
Easy handling
Water tight
Strain relief
Accessories
Lock nuts
Reducing seals
Flat cable seals
Multihole seals
Remarks
Different sealing types available
Large accessory range
Manufactured according to the requirements of EN 50262
| Thread Type | Clamping Range | Shield Diameter | TL mm | TD mm | SW1 mm | SW2 mm | Max. | CODES | Inner Pack | Box/Min.OQ |
| min-max mm | min mm | H mm | ||||||||
| M12X1,5 | 3,0 - 6,5 | 2,0 - 5,0 | 6,0 | 12 | 14,0 | 14,0 | 28,0 | BMEM-ES (M12T) | 50 | 200 |
| M16X1,5 | 5,0 - 10,0 | 3,5 - 8,0 | 6,0 | 16 | 20,0 | 20,0 | 33,0 | BMEM-E1 (M16T) | 50 | 100 |
| M20X1,5 | 6,0 - 12,0 | 4,5 - 10,0 | 6,0 | 20 | 22,0 | 22,0 | 32,0 | BMEM-E2S (M20T) | 50 | 800 |
| M20X1,5 | 7,5 - 14,0 | 5,5 - 11,5 | 8,0 | 20 | 24,0 | 24,0 | 39,5 | BMEM-E2 (M20T) | 50 | 600 |
| M25X1,5 | 10,0- 18,0 | 7,0 - 14,0 | 8,0 | 25 | 30,0 | 30,0 | 43,0 | BMEM-E3 (M25T) | 25 | 400 |
| M32X1,5 | 16,0 - 25,0 | 12,0 - 20,0 | 9,0 | 32 | 40,0 | 40,0 | 53,0 | BMEM-E4 (M32T) | 25 | 250 |
| M40X1,5 | 22,0 - 32,0 | 18,0 - 27,0 | 9,0 | 40 | 50,0 | 50,0 | 60,5 | BMEM-E5 (M40T) | 20 | 140 |
| M50X1,5 | 30,0 - 38,0 | 26,0 - 34,0 | 9,0 | 50 | 58,0 | 58,0 | 73,0 | BMEM-E6 (M50T) | 12 | 72 |
| M63X1,5 | 34,0 - 44,0 | 30,0 - 40,0 | 14,0 | 63 | 64,0 | 68,0 | 59,0 | BMEM-E7 (M63T) | 12 | 72 |
| M63X1,5 | 37,0 - 53,0 | 33,0 - 49,0 | 10,0 | 63 | 75,0 | 75,0 | 72,0 | BMEM-E7L (M63T) | 12 | 72 |
| Pg7 | 3,0 - 6,5 | 2,0 - 5,0 | 6,0 | 12,50 | 14,0 | 14,0 | 22,0 | BSEM-E1(Pg7T) | 50 | 2000 |
| Pg9 | 4,0 - 8,0 | 3,0 - 4,0 | 6,0 | 15,20 | 17,0 | 17,0 | 23,0 | BSEM-E2 (Pg9T) | 50 | 1500 |
| Pg11 | 5,0 - 10,0 | 3,5 - 8,0 | 6,0 | 18,60 | 20,0 | 20,0 | 28,0 | BSEM-E3(Pg11T) | 50 | 1 |
| Pg13,5 | 6,0 - 12,0 | 4,5 - 10,0 | 6,0 | 20,40 | 22,0 | 22,0 | 26,0 | BSEM-E4(Pg13,5T) | 50 | 800 |
| Pg16 | 7,5 - 14,0 | 5,5 - 11,5 | 8,0 | 22,50 | 24,0 | 24,0 | 30,0 | BSEM-E5 (Pg16T) | 25 | 600 |
| Pg21 | 10,0 - 18,0 | 7,0 - 14,0 | 8,0 | 28,30 | 30,0 | 30,0 | 34,0 | BSEM-E6 (Pg21T) | 25 | 400 |
| Pg29 | 16,0 - 25,0 | 12,0 - 20,0 | 9,0 | 37,00 | 40,0 | 40,0 | 41,0 | BSEM-E7 (Pg29T) | 25 | 250 |
| Pg36 | 22,0 - 32,0 | 18,0 - 27,0 | 9,0 | 47,00 | 50,0 | 50,0 | 48,0 | BSEM-E8 (Pg36T) | 20 | 140 |
| Pg42 | 30,0 - 38,0 | 26,0 - 34,0 | 9,0 | 54,00 | 58,0 | 60,0 | 49,0 | BSEM-E9 (Pg42T) | 10 | 100 |
| Pg48 | 34,0 - 44,0 | 30,0 - 40,0 | 14,0 | 59,30 | 64,0 | 68,0 | 52,0 | BSEM-E0 (Pg48T) | 5 | 50 |
