| 品牌：意沃/ewo | 适用范围：广泛 | 连接型式：电询 |
| 接管口径：32 | 适用软管：橡胶管 | 使用流体：空气 |
本店商品均不含税点金额，如需开发票请咨询客户添加税点，如直接备注开票未咨询客服＋税点的，本店有权不开发票。
产品展示
产品介绍
防爆电缆夹紧密封接头 防爆接头 【BIMED】防爆电缆接头
These EMC cable glands combine several advantages in one product. First, you get the same clamping ranges as the standard brass glands. The protection class is IP68. In order to get a low electrical impedance between the cable gland and the braiding of the cable the cable gland does not have to be disassembled. Secondly, a perfect shielding will be achieved by just tightening the dome nut. This high tech cable gland consists of a nickel plated brass body, PA6 clamping insert, an EMC contact element and choloprene seal. The components are pre-assembled.
To install an EMC cable gland remove approx. 5 – 10 mm (0.20 – 0.39) of the insulation of the cable. Insert the cable in to the cable gland and adjust it without the contact elements touching the braiding. Tighten the cap and conductivity will be established. The design of the contact elements will adapt to different cable diameters according to the clamping range of the cable glands. Since the clamping insert of the cable gland is as long as the gland itself electrical shortcuts between the body and individual wires will be avoided. |
Tightening the dome nut will have three different effects: The cable will be centered in the cable gland, the choloprene seal will ensure IP 68 protection, and the design of the dome cap will provide appropriate strain relief. All is done by just one turn of the dome cap. Even uninstalling the cable is easy; open the dome cap and pull the cable out of the cable gland together with the insert, which can then be removed easily. |
【bimed】Technical Details | ||
Material | ||
| Body | Brass, Nickel plated |
| Cap | Brass, Nickel plated |
| Contact Spr. | Special Copper Alloy |
| Clamp.Insert | Polyamide 6 V2 |
| Seal | Chloroprene |
| O-ring | NBR |
Flammability | V2 (According to UL 94) | |
Protection Class | IP 68 - 5 Bar | |
Operating Temperature | ||
| Permanent | -20 °C up to +100 °C |
| Intermittent | -40 °C up to +150 °C |
Benefits | ||
| Suitable for highest demands of todays technology | |
| Easy to assemble | |
| Easy handling | |
| Water tight | |
| Strain relief | |
Accessories | ||
| Lock nuts | |
Remarks | ||
| Manufactured according to the requirements of EN 50262 | |
Technical Information | Codes | Packing Information | |||||||||
Thread Type | Clamping Range Ø min-max mm | Shield Diameter | TL mm | TD mm | SW1 mm | SW2 mm | Max. | D mm | Inner Pack | Box/Min.OQ | |
Metric Thread (Attachment thread : EN 60423) | |||||||||||
M12X1,5 | 3,0 - 6,5 | 2,5 | 6,0 | 12,0 | 14,0 | 14,0 | 22,0 | 15,5 | BMEM-0S | 50 | 2.000 |
M16X1,5 | 4,0 - 8,0 | 3,0 | 7,0 | 16,0 | 17,0 | 18,0 | 23,0 | 18,9 | BMEM-01 | 50 | 1.500 |
M16X1,5 | 4,5 - 10,0 | 3,5 | 6,5 | 16,0 | 20,0 | 20,0 | 24,0 | 22,0 | BMEM-01S | 50 | 1.500 |
M20X1,5 | 6,0 - 12,0 | 4,5 | 8,0 | 20,0 | 22,0 | 22,0 | 25,0 | 24,5 | BMEM-02 | 50 | 800 |
M25X1,5 | 10,0 - 14,0 | 8,5 | 8,0 | 25,0 | 24,0 | 27,0 | 28,0 | 26,8 | BMEM-03 | 25 | 500 |
M25X1,5 | 12,0 - 18,0 | 10,5 | 8,0 | 25,0 | 30,0 | 30,0 | 37,0 | 33,0 | BMEM-03S | 25 | 400 |
M32X1,5 | 13,0 - 18,0 | 11,0 | 9,0 | 32,0 | 30,0 | 34,0 | 33,0 | 33,0 | BMEM-04 | 25 | 350 |
M32X1,5 | 17,0 - 24,0 | 14,0 | 8,0 | 32,0 | 40,0 | 40,0 | 35,0 | 41,8 | BMEM-04S | 25 | 250 |
M40X1,5 | 18,0 - 25,0 | 16,0 | 9,0 | 40,0 | 40,0 | 43,0 | 39,0 | 44,5 | BMEM-05 | 20 | 160 |
M40X1,5 | 22,0 - 32,0 | 20,0 | 8,0 | 40,0 | 50,0 | 50,0 | 42,0 | 55,0 | BMEM-05S | 20 | 140 |
M50X1,5 | 22,0 - 32,0 | 20,0 | 9,0 | 50,0 | 50,0 | 55,0 | 47,0 | 55,5 | BMEM-06 | 15 | 90 |
M50X1,5 | 30,0 - 38,0 | 26,0 | 9,0 | 50,0 | 57,0 | 57,0 | 49,0 | 62,7 | BMEM-06S | 10 | 70 |
M63X1,5 | 34,0 - 44,0 | 31,0 | 14,0 | 63,0 | 64,0 | 68,0 | 53,0s | 70,0 | BMEM-07 | 12 | 72 |
Glands with Long Thread | |||||||||||
M12X1,5 | 3,0 - 6,5 | 2,5 | 12,0 | 12,0 | 14,0 | 14,0 | 21,8 | 15,5 | BMEN-0S | 50 | 2.000 |
M16X1,5 | 4,0 - 8,0 | 3,0 | 12,0 | 16,0 | 17,0 | 18,0 | 22,6 | 18,9 | BMEN-01 | 50 | 1.500 |
M20X1,5 | 6,0 - 12,0 | 4,5 | 12,0 | 20,0 | 22,0 | 22,0 | 24,5 | 24,5 | BMEN-02 | 50 | 800 |
M25X1,5 | 10,0 - 14,0 | 8,5 | 12,0 | 25,0 | 24,0 | 27,0 | 27,5 | 26,8 | BMEN-03 | 25 | 400 |
M32X1,5 | 13,0 - 18,0 | 11,0 | 15,0 | 32,0 | 30,0 | 34,0 | 33,0 | 33,0 | BMEN-04 | 25 | 300 |
M40X1,5 | 18,0 - 25,0 | 16,0 | 15,0 | 40,0 | 40,0 | 43,0 | 39,0 | 44,5 | BMEN-05 | 20 | 160 |
M50X1,5 | 22,0 - 32,0 | 20,0 | 15,0 | 50,0 | 50,0 | 55,0 | 47,3 | 55,5 | BMEN-06 | 15 | 90 |
M63X1,5 | 34,0 - 44,0 | 31,0 | 18,0 | 63,0 | 64,0 | 68,0 | 52,2 | 70,0 | BMEN-07 | 12 | 72 |
Pg Thread (Attachment thread : DIN 40430) | |||||||||||
Pg7 | 3,0 - 6,5 | 2,5 | 6,0 | 12,5 | 14,0 | 14,0 | 21,8 | 15,5 | BSEM-01 | 50 | 2.000 |
Pg9 | 4,0 - 8,0 | 3,0 | 6,0 | 15,2 | 17,0 | 17,0 | 22,6 | 18,9 | BSEM-02 | 50 | 1.500 |
Pg11 | 5,0 - 10,0 | 4,0 | 6,0 | 18,6 | 20,0 | 20,0 | 25,3 | 22,0 | BSEM-03 | 50 | 1.000 |
Pg13,5 | 6,0 - 12,0 | 5,0 | 6,5 | 20,4 | 22,0 | 22,0 | 24,1 | 24,5 | BSEM-04 | 50 | 800 |
Pg16 | 10,0 - 14,0 | 8,5 | 6,5 | 22,5 | 24,0 | 24,0 | 27,5 | 26,8 | BSEM-05 | 25 | 600 |
Pg21 | 13,0 - 18,0 | 11,0 | 7,2 | 28,3 | 30,0 | 30,0 | 31,2 | 33,0 | BSEM-06 | 25 | 350 |
Pg29 | 18,0 - 25,0 | 16,0 | 8,0 | 37,0 | 40,0 | 40,0 | 39,3 | 44,5 | BSEM-07 | 20 | 160 |
Pg36 | 22,0 - 32,0 | 20,0 | 9,0 | 47,0 | 50,0 | 50,0 | 47,2 | 55,5 | BSEM-08 | 15 | 90 |
Pg42 | 30,0 - 38,0 | 28,0 | 12,0 | 54,0 | 58,0 | 58,0 | 47,7 | 64,0 | BSEM-09 | 12 | 72 |
Pg48 | 34,0 - 44,0 | 31,0 | 14,0 | 59,3 | 64,0 | 64,0 | 52,0 | 70,0 | BSEM-10 | 12 | 72 |
公司介绍
TheBimedcompany has started its activity in 1978 as a medical and mechanical components manufacturer. After various development and reorganization steps during its life, Bimed has today become a large organization working in a 15,000 square meter facility with a staff of 300 people. 16 constitute the quality assurance department and 10 for the research and development division. By adding precision engine spindles and other mechanical parts to the production line, the company diversified its products. Our products can be classified as follows:
•Cable fitting elements, as plastic and metallic cable glands
•Pressure balance elements or ventilation plugs
•Plastic connectors for the white and automotive industries
•Gas springs for the automotive and furniture industries
•Disposable medical products
•Various custom products as requested by our customers
Bimed manufactures cable fitting elements which are designed for multipurpose applications in electrical, electronic and automotive industries. Our production capacity is supported by both manual and fully automated assembly lines. All our products conform to the relevant international and national standards of the end user countries. Tight control is imposed at all the stages of the production process and all the non-conformities are immediately eliminated. To achieve this, a full traceability system is developed in accordance with the EN ISO 9001:2008 standard. As a result,
Bimed has been able to establish an international reputation for its consistently high quality production standards. Bimed is constantly working to achieve customer satisfaction, by meeting requested requirements with its standard and customized products. Most often, our research and development department produces completely new items in accordance with client demands. These activities help us gain the praise and high appreciation of our customers.
With a worldwide market base, the Bimed distribution network has been established to ensure that the needs of this global market are well understood and fully satisfied. Our products have been expanded to and distributed in more than 30 countries. Bimed has a merit-based leadership in the cable gland and connector sector established on its reputation for quality and innovation. This philosophy has been instrumental in the development of a product line that is constantly growing to reflect the changing industry needs and advancements in technology.
With an active research and development program, Bimed has launched several new classes of cable glands for use in specific applications. These are produced in brass, stainless steel, well-known plastics and newly engineered plastics that meet severe working conditions. All our new products are submitted to the relevant accredited test bodies for approval. In general, all the new products introduced by Bimed are designed to give the end users significant advantages especially in assembly simplifications that allow for greater protection against possible damages to the underlying cables and equipment.
With the above resume about Bimed we intend to emphasize the Bimed production philosophy and let it serve as certification for the large product line manufactured by all our divisions.
